Toro Flex-Force Power System 60V MAX - Setup; Installing the Battery Guard Rod

Setup
1
InstallingtheBatteryGuardRod
Partsneededforthisprocedure:
1Batteryguardrod
Procedure
1.Alignthearmsoftheguardrodwiththeguideonthepowerhead.
2.Lightlypullthearmsoftheguardrodsothattheytaroundthepowerhead,andttherodendsintothe
mountingholes.
g385364
Figure3
1.Batteryguardrod3.Mountinghole
2.Rodguide
9