Toro Flex-Force Power System 60V MAX - Installing the Auxiliary Handle

3
InstallingtheAuxiliaryHandle
Partsneededforthisprocedure:
1Auxiliaryhandleassembly
Procedure
1.Separatetheauxiliaryhandlefromthehandleplatebyremovingthe4socketheadscrewsusingthe
providedAllenwrench(AofFigure5).
2.Lineuptheauxiliaryhandlewithauxiliaryhandleplateonthetrimmerhandle(BofFigure5).
3.Securetheauxiliaryhandletothehandleplatewiththe4socketheadscrewspreviouslyremoved(Cof
Figure5).
g357443
Figure5
11