Toro GrandStand 74534TE - Motion Control Handle Adjustment

Figure68
1.Hydraulicpumps
4.Clutchretainer
2.Idlerpulley5.Pumpdrivebelt
3.Clutchpulley
6.Pumpdrivepulley
8.Lowerthemachinetotheoperatingposition.
RefertoPreMaintenanceatthebeginningofthe
MaintenanceSection.
9.Installthemowerdeckbelttotheclutchon30in
mowerdecksorinstalltheleftmowerbeltinstallthe
clutchfor40inmowerdecks.RefertoReplacingthe
MowerDeckBelts.
ControlsSystem
Maintenance
AdjustingtheMotionControl
HandlePositions
AdjustingtheRightSideMotionControl
Lever
Ifthemotioncontrolleversdonotalignhorizontally,
adjusttherightsidemotioncontrollever.
Note:Adjustthehorizontalalignmentbeforethefront
tobackalignment.
1.DisengagethePTO,movetherightsidemotion
controllevertotheneutralpositionandsetthe
parkingbrake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Pushtherightmotioncontrolleverdownoutof
lockedneutralposition(
Figure69).
4.Checkifitalignshorizontallywiththeleftmotion
controllever(
Figure69).
Figure69
1.Leftmotioncontrollever3.Checkthehorizontal
alignmenthere
2.Rightmotioncontrollever
inneutrallockedposition
4.Rightmotioncontrollever
5.Toadjusttherightmotioncontrolleverhorizontally,
thecamneedstobeadjusted.
6.Removethecushionfromtherearofthemachine.
7.Loosenthenutholdingthecam(Figure70).
8.Adjustthecamuntiltherightmotioncontrollever
alignswiththeleftmotioncontrolleverandtighten
thenutandboltforthecam.
49