Toro GrandStand 74558 - Drive System Maintenance; Adjusting the Tracking

Figure52
1.Controls
3.Fuses
2.Wire
DriveSystem
Maintenance
AdjustingtheTracking
Note:Determinetheleftandrightsidesofthemachine
fromthenormaloperatingposition.
1.Pushbothcontrolleversforwardthesamedistance.
2.Checkifthemachinepullstooneside.Ifitdoes,
stopthemachineandsettheparkingbrake.
3.Removethecushionfromtherearofthemachine.
4.Rotatethethumbadjustmentonthesideofthe
machinethatittracksto(asviewedfromtherearof
themachine)(Figure53).
5.Adjustinquarter-turnincrementsuntilthemachine
tracksstraight.
6.Checkforpropertracking.
Figure53
1.Leftthumbadjustment3.Platformdown
2.Rightthumbadjustment
7.Repeatadjustmentuntilthetrackingiscorrect.
8.Checkthatthemachinedoesnotcreepfromneutral
withtheparkbrakesdisengaged.
Important:DoNotrotatethelinkagetoofar,as
thismaycausethemachinetocreepinneutral.
39