Toro GrandStand 74558 - Motion Control Levers

Figure65
1.Switch
3.Rightmotioncontrollever
intheneutralunlocked
position
2.1/8inch(3mm)
12.Tightentheswitchscrews.
AdjustingtheNeutralPostionforthe
MotionControlLevers
Important:Ensurethetrackingofthemoweris
correctafteradjustingthemotioncontrollevers.
Adjustingthetrackingandaligningthemotion
controlleversfronttobackisthesameprocedure
(Figure66).
Note:Adjustthehorizontalalignmentbeforethefront
tobackalignment.
Ifthemotioncontrolleversdonotalignfronttoback,
ortherightsidecontrolleverdoesnotmoveeasilyinto
theneutrallockposition,adjustmentisrequired.
1.Afterthehorizontalalignmentisnished,checkthe
fronttobackalignment(Figure66).
Figure66
1.Leftmotioncontrollever
3.Neutrallockedposition
2.Rightmotioncontrollever4.Alignthecontrollevers
fronttoback
2.Rotatethethumbadjustmentsoneitherside.Adjust
theminquarter-turnincrementsuntiltherightside
controllevermoveseasilyintotheneutrallock
positionandthecontrolleversalign.
3.Checkforpropertracking.RefertoAdjustingthe
TrackingintheMaintenanceSection.
Figure67
1.Leftthumbadjustment3.Platformdown
2.Rightthumbadjustment
46