Toro Greensmaster 3320 TriFlex - Installing the Oil Cooler

g256064
Figure7
4.Installtheelectric-reel-motorcounterweight;
refertoInstallingtheElectricalCounterweights
(page46).
5.Installthecuttingunits;refertoInstallingthe
CuttingUnits(page46).
8
SettingtheClip-Control
Feature
NoPartsRequired
Procedure
Themachinehasaclip-controlfeaturethatvariesthe
speedofthereelswiththespeedofthemachineto
maintainaconstantclip.Thisachievesaconsistent,
highquality-of-cutandauniformafter-cutappearance.
Theclip-controlfeatureisoffbydefault;tocongureit
andturniton,refertoSettingtheClip-ControlFeature
(page19)
9
AddingRearWeight
Partsneededforthisprocedure:
1
WeightKit(PartNo.119-7129)—soldseparately
1
Three-Wheel-DriveWeightKit(PartNo.
120-5750—soldseparately)
Procedure
•ThismachinecomplieswithANSIB71.4-2017and
ENISO5395whenequippedwiththeWeightKit
(PartNo.119-7129).
•Ifyourmachineisequippedwiththe
Three-Wheel-DriveKit,themachinecomplieswith
ANSIB71.4-2017andENISO5395whenthe
Three-Wheel-DriveWeightKit(PartNo.120-5750)
isinstalled.
10
InstallingtheCEDecals
Partsneededforthisprocedure:
1
Warningdecal(PartNo.136-8505)
1
CEmarkdecal
1Productionyeardecal
Procedure
Ifyouusethismachineinacountrythatcompliesto
CEstandards,performthefollowingstepsafteryou
installtheguardkittothemachine:
•ApplytheCEwarningdecal(PartNo.136-8505)
overtheexistingwarningdecal(PartNo.
136-8506).
•ApplytheCEmarkdecaltotheframeunderthe
frontoftheseat(Figure8).
13