Toro Groundsmaster 4000 Series - Page 27

g350747
Figure63
1.Bumper
4.Slowmovingvehicle
mount
2.Spacer5.Speeddecal
3.Flange-headlocknut(1/4
inch)
2.Removethebackinglmfromthespeeddecal.
3.Alignthespeeddecaltotheslowmovingvehicle
mount,andadherethedecaltothemount
(Figure63).
4.Assemblethe2nutclips(#10)totheslow
movingvehiclemount(Figure64).
g350775
Figure64
1.Nutclip(#10)3.Socket-headscrews(#10
x3/4inch)
2.License-platelight
5.Aligntheharnessofthelicense-platelight
throughtheslowmovingvehiclemount(Figure
64).
6.Securethelicense-platelighttothenutclips
(Figure64)with2socket-headscrews(#10x
3/4inch).
AssemblingtheSlowMoving
VehicleMounttotheHood
1.Ateachhoodpivotbracket(Figure65),remove
therearmostange-headcapscrew(3/8x1-1/4
inches).
27