Toro Groundsmaster 4500-D - Page 14

6.Installthenewsteelplateintothefuse
compartmentwiththepreviouslyremovedbolts.
7.Connectthelarge-ringterminal,fromthewire
harness,tothestudonthejunctionblock(Figure
20).
8.Connectthesmall-ringterminalfromthewire
harnessto1ofthescrewsontheground-block
terminal(Figure20).
g371732
Figure20
1.Battery
3.Small-ringterminal
2.Large-ringterminal
9.Installthemoduletothesteelplatewiththe
bracketand2bolts(#8x1/2inch);referto
Figure19.
Note:Donotovertightenthescrews.
10.Installthecompartmentclampandsealtothe
tractionunitwiththeange-headscrew(Figure
17).
11.Routethefrontendofthewireharnessunder
theoperatorplatformtothefrontofthetraction
unit(Figure21).
g371712
Figure21
1.Rightfront-light
conncector
4.Brakeconnector
2.Connectorsforthecontrols
5.Hornconnectors
3.Leftfront-lightconncector
12.Threadeachharnessconnectorthroughthe
appropriateheadlightbracketandconnectitto
theheadlight(Figure21).
13.Plugthewireharnesslead,withthe2
connectors,intothehorn(Figure22).
g371794
Figure22
1.Horn
3.Cabletie
2.Connectors
14.Positiontheplatformshroudontopoftheframe
(Figure23).
15.Securetheshroudandtheheadlightstothe
framewiththe2carriageboltsandnutsyou
previouslyremoved(Figure23).
14