Toro Groundsmaster 4700-D - Page 8

Note:Ensurethattheturn-signallensonthe
headlightispositionedtowardtheoutsideofthe
tractionunit.
g371180
Figure7
Rightheadlightassemblyshown
1.Headlight4.Pivotbracket
2.Pivotboltwithlocknut5.Washer
3.Mountingbolt
6.Locknut(M12)
3.Tightenthelocknuttormlyholdtheheadlight
assemblytotheheadlightbracket.
Note:Donotovertightenthelocknut.
InstallingtheHeadlightBracketto
aCabModel
1.Installabent-platebracketontoeachofthe
uppercornersofthelowerfrontpanelofthecab
withtheexistingscrewsasshowninFigure8.
g034337
Figure8
1.Bolt(5/16x1-5/8inches)
5.Rubberhanger
2.Washer
6.Flangenut(5/16inch)
3.Bent-platebracket
7.Screw(existing)
4.Spacer
2.Looselyinstallarubberhangertoeach
bent-platebracketwithabolt(5/16x1-5/8inch),
2washers(3/8inch),aspacer,andaangenut
(5/16inch)asshowninFigure8.
3.Looselyinstalltheleftandrightheadlight
bracketstothefrontoftheroller-supporttube
with6bolts(3/8x2-1/2inches)andangenuts
(3/8inch).Positionthebracketsasshownin
Figure9.
Note:Ensurethattheholesinthebent-plate
bracketsalignwiththeholesintherubber
hangers.
8