g320855
Figure6
1.Alarm3.Threadedring
2.Consolepanel
Note:Installingthelightandremovingthedecal
areaisformachineswithoutanInfoCenteronly.
12.FormachineswithnoInfoCenter,cutoutthe
holeintheconsoledecalforthelight.
13.Installthelightintothetopoftheconsole(Figure
7).
g320858
Figure7
1.Light
RoutingtheWireHarness
1.Routethewireharnessundertheseatpanand
alongthealongtheexistingwireharnessinthe
crosschannel(Figure8).
2.Installthemiddleconnectortothemachinewire
harnessconnectorlabeledTELEMATICSportor
EXPANSIONport(Figure8).
3.Connectthewireharnesstothelightandthe
alarm(Figure8).
Routetheharnesstothecontrolsalongthe
machine’sexistingwireharness.
g320862
Figure8
1.Alarmconnector
5.90°connector
2.Fuseholder6.Lightconnector
3.Calibrationconnectors
7.Routetheharnessunder
theseatnexttothe
existingharness.
4.Middleconnector
4.Usethecabletiestoconnectthenewharness
totheexistingmachineharness.
5
To Next Page
Loading...
