To Next Page
S
Samuel FrancoAug 25, 2025
What to do if Toro LT2240 engine does not start with the ignition key?
- TTiffany HoldenAug 26, 2025
If your Toro Lawn Mower's engine doesn't start when using the ignition key, it could be due to several reasons: * The transmission neutral interlock switch may not be energized. Ensure your foot is removed from the forward/reverse pedals or check the setting of the transmission neutral interlock switch. * The parking brake interlock switch might not be activated. Move the parking brake switch to the on position. * The cutting unit drive interlock switch could be the issue. Move the cutting unit switch to the off position. * There may be a malfunctioning electrical connection. In this case, you'll need to locate and correct the fault in the electrical system.
General
