A
Aaron MccormickAug 31, 2025
What to do if Toro Lawn Mower has lines of uncut or badly cut grass in the direction of travel?
- LLinda GilbertSep 1, 2025
If your Toro Lawn Mower leaves lines of uncut or badly cut grass, consider these potential causes: * Tram lining of the cutting edges due to heavy contact caused by poor reel-to-bedknife adjustment. Back lap or grind the edges. * The bedknife is in contact with the ground. Raise the height of cut. * The bedknife has a nose-down angle. Adjust the cutting unit to position the bedknife parallel to the ground. * The cutting units are bouncing. Reduce the forward speed and reduce the weight transfer. * Worn reel bearings/bearing housing pivots. Replace any worn parts. * Loose components in the cutting unit. Check and tighten components as necessary.