Need help?Do you have a question about the Toro LTC PRO and is the answer not in the manual?
General| Brand | Toro |
|---|---|
| Model | LTC PRO |
| Category | Controller |
| Language | English |
Details about the radio equipment, frequency band, and power specifications.
Information on power supply, field output, control functions, and communication board fuses.
Specifications including line voltage, current draw, and operating temperature for the controller.
Explanation of arrow keys and input dial for menu navigation and value selection.
Description of the LCD panel and operation mode LED display.
Details on the purpose and operation of various control buttons like Home, Start, Pause, Stop, and Settings.
Identifies components and connectors on the distribution board.
Details the output board, including LED indicators, fuses, and terminal connectors.
Description of the pump/common board, switches, LEDs, and fuse.
Details the communication board, including data sockets and fuses for line protection.
Function of the Home key for saving settings and returning to the default display.
Procedure for activating stations or groups of stations with a specified runtime.
How to activate all stations in a program for a specified runtime.
Procedure to activate a watering program regardless of its set start time.
Selects the satellite operating mode: Central, Local, or Off.
Option to suspend satellite operation for a specified duration.
Procedures to reset irrigation programs, station settings, or all satellite unit defaults.
Adjusts station operation percentage, reducing or increasing watering from 0% to 900%.
Delays operation for a specific station for a set duration or permanently.
Assigns a descriptive name or acronym to each station for easier identification.
Details parameters for creating and modifying irrigation programs, including start times and days.
Settings for program repeats and soak delays to manage watering cycles.
Details circuit breakers and fuses protecting the controller from electrical faults.
Guidance on checking voltage supply for power transformer and output boards.
Explanation of LED indicators for pump and common relay activation.
Description of LEDs indicating 24 VAC output, module logic, and station activation.
Explanation of LEDs indicating TX, RX, and voltage status for communication and timing mechanisms.
To Next Page
