Toro Power Clear 621 E User Manual

FormNo.3369-491RevD
PowerClear®621R/621ESnowthrower
ModelNo.38451—SerialNo.312000001andUp
ModelNo.38452—SerialNo.312000001andUp
Operator'sManual
Introduction
Thismachineisintendedtobeusedbyresidential
homeownersorprofessional,hiredoperators.It
isdesignedprimarilyforremovingsnowfrom
pavedsurfaces,suchasdrivewaysandsidewalks,
andothersurfacesfortrafconresidentialor
commercialproperties.Itisnotdesignedfor
removingmaterialsotherthansnow,norisit
designedforclearingoffgravelsurfaces.
Readthisinformationcarefullytolearnhowtooperate
andmaintainyourmachineproperlyandtoavoidinjury
andmachinedamage.Youareresponsibleforoperating
themachineproperlyandsafely.
YoumaycontactTorodirectlyatwww .Toro.comfor
machineandaccessoryinformation,helpndinga
dealer,ortoregisteryourmachine.
Wheneveryouneedservice,genuineToroparts,
oradditionalinformation,contactanAuthorized
ServiceDealerorToroCustomerServiceandhave
themodelandserialnumbersofyourmachineready.
Figure1identiesthelocationofthemodelandserial
numbersonthemachine.Writethenumbersinthe
spaceprovided.
G016241
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhassafety
messagesidentiedbythesafetyalertsymbol(Figure2),
whichsignalsahazardthatmaycauseseriousinjury
ordeathifyoudonotfollowtherecommended
precautions.
Figure2
1.Safetyalertsymbol
Thismanualuses2wordstohighlightinformation.
Importantcallsattentiontospecialmechanical
informationandNoteemphasizesgeneralinformation
worthyofspecialattention.
Safety
Readandunderstandthecontentsofthismanual
beforeyoustarttheengine.
Thesafetyalertsymbolshownin
Figure2isusedto
alertyoutopotentialpersonalinjuryhazards.Obey
allsafetymessagesthatfollowthissymboltoavoid
possibleinjuryordeath.
Improperlyusingormaintainingthismachine
couldresultininjuryordeath.Toreducethis
potential,complywiththefollowingsafety
instructions.
Thismachineiscapableofamputatinghandsand
feetandofthrowingobjects.Failuretoobservethe
followingsafetyinstructionscouldresultinserious
injury.
Training
•Read,understand,andfollowallinstructionsonthe
machineandinthemanual(s)beforeoperatingthis
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved

Toro Power Clear 621 E Specifications

General

Clearing Width (in)	21
Clearing Depth (in)	12
Start Type	Recoil
Starting System	Manual
Starter Type	Recoil
Chute Control	Manual
Engine Displacement (cc)	212
Clearing Width (cm)	53.3
Throw Distance (ft)	35
Warranty	2 years

Summary

Safety Precautions

General Hazards and Operation Safety

Machine hazards, safe operation rules, guards, discharge direction, stopping.

Training and Preparation

Operator Training and Pre-Operation Checks

Reading manual, understanding controls, inspect area, wear gear, fuel safety.

Toro Snowthrower Safety

Rotor Blade Hazard and Maintenance Safety

Rotor blade risks, stop engine/remove key before maintenance.

Storage Safety and Chute Clearing

Fuel storage, clearing clogged chute safely with tool.

Filling the Engine with Oil

Oil Level, Type, and Filling Procedure

Product Overview and Fueling Safety

Component Identification and Gasoline Safety

Diagram of parts and critical warnings about gasoline flammability.

Fueling Precautions

Engine Start Procedures

Primer, Starter Operation, and Electrical Safety

Using primer, starting methods, and electrical cord precautions.

Engine Operation Controls

Rotor Blade Control, Stopping Engine, and Chute Adjustment

Power Cord Safety

Caution to unplug the power cord when not in use.

Preventing Freeze-up and Operation Tips

Post-Use Freeze Prevention and Chute Clearing

Steps to prevent freezing and clear clogged chutes safely.

Operating Safety Tips

Warnings about thrown objects and keeping people/pets away.

Maintenance Schedule

Recommended Maintenance Intervals

Adjusting the Control Cable

Control Cable Adjustment and Slack

Engine Maintenance

Changing Engine Oil and Inspecting Rotor Blades

Storage Procedures

Storing the Snowthrower Safely