Toro Power Max 724 OE - Installing the Chute Control Rod

4
InstallingtheChuteControl
Rod
Partsneededforthisprocedure:
2
Carriagebolts
2Locknuts
Procedure
1.Removethebluerodcapfromthechutecontrolrod.
2.Insertthefrontendoftherodintotheopeningin
thebackofthechutegearcoveruntilitslidesintothe
chutegear(
Figure10).
g019005
Figure9
1.Shortrod
2.Longchutecontrolrod
g018899
Figure10
3.Aligntheholesinthenestedendsoftherodsand
insert2carriagebolts(intheloosepartsbag)through
theshortrodfromtheleftsideofthemachine(from
theoperatingposition).
4.Ensurethechutecontroloperatessmoothly.
10