Toro Power Max 724 OE - Checking and Adjusting the Auger;Impeller Cable

4.Tightenthejamnut(Figure36),ensuringthereisslight
tensiononthecable.
5.Ifthetractioncableisproperlyadjustedbutaproblem
remains,contactanAuthorizedServiceDealer.
CheckingandAdjustingthe
Auger/ImpellerCable
ServiceInterval:Aftertherst2hours—Inspectthe
auger/impellercableandadjustitif
necessary.
Yearly—Inspecttheauger/impellercable
andadjustorreplaceitifnecessary.
1.Loosenthejamnut.
2.Engagetheauger/impellerleverandholditinplace
(
Figure37).
Figure37
3.Loosenortightentheturnbuckletoadjustthespring
lengthto2.75inches(7cm)(Figure38).
2
1
3
g019047
4
Figure38
1.Jamnut
3.Spring
2.Turnbuckle
4.2.75inches(7cm)
4.Tightenthejamnut(Figure38),ensuringthereisslight
tensiononthecable.
5.Iftheauger/impellercableisproperlyadjustedbut
aproblemremains,contactanAuthorizedService
Dealer.
22