Toro Power Max Heavy Duty 826 OXE - Checking the Traction Drive Operation

9
CheckingtheTractionDrive
Operation
NoPartsRequired
Procedure
CAUTION
Ifthetractiondriveisnotproperlyadjusted,the
machinemaymoveinthedirectionoppositeof
whatyouintended,causinginjuryand/orproperty
damage.
Carefullycheckthetractiondriveandadjustit
properly,ifnecessary.
Note:Tocheckthetractiondriveoperation,theself-propel
featuremustbeengagedbyensuringthewheelsarepinned
intheaxle.RefertoFreewheelingorUsingtheSelf-propel
Drive(page14).
1.Starttheengine;refertoStartingtheEngine(page15).
2.MovethespeedselectortoPositionR1;referto
OperatingtheSpeedSelector(page18).
3.Squeezethelefthand(traction)levertothehand-grip
(Figure21).
Figure21
Themachineshouldmoverearward.Ifthemachine
doesnotmoveormovesforward,completethe
following:
A.Releasethetractionleverandstoptheengine.
B.Disconnectthetrunnionfromthespeedselector
lever(Figure12).
C.Turnthetrunniondownward(clockwise)onthe
speedcontrolrod(Figure12).
D.Connectthetrunniontothespeedselectorlever
(Figure12).
4.Releasethetractionlever.
5.MovethespeedselectortothePositionF1;referto
OperatingtheSpeedSelector.
6.Squeezethelefthand(traction)levertothehand-grip
(Figure21).
Themachineshouldmoveforward.Ifthemachine
doesnotmoveormovesrearward,completethe
following:
A.Releasethetractionleverandstoptheengine.
B.Disconnectthetrunnionfromthespeedselector
lever(Figure12).
C.Turnthetrunnionupward(counterclockwise)on
thespeedcontrolrod(Figure12).
D.Connectthetrunniontothespeedselectorlever
(Figure12).
7.Ifyoumadeanyadjustments,repeatthisprocedure
untilnoadjustmentsarerequired.
Important:Ifthemachinemoveswhenthetraction
leverisinthereleasedposition,checkthetractioncable
(referto(page))ortakethemachinetoanAuthorized
ServiceDealerforservice.
13