Toro Power Max Heavy Duty 826 OXE - Replacing the Drive Belts; Replacing the Headlight Bulb

Figure61
1.Dischargechutelatch
2.Gearteeth
Note:Thelatchisspringloadedandwillnaturally
moveintotheteethofthegear(Figure61).
4.Removeanyslackinthecablebypullingthecable
conduitrearward.
5.Tightentheboltonthecableclamp,beingcarefulnot
tostriptheplasticpart.
6.Installandsecurethegearcover.
ReplacingtheDriveBelts
Iftheauger/impellerdrivebeltorthetractiondrivebelt
becomesworn,oil-soaked,orotherwisedamaged,havean
AuthorizedServiceDealerreplacethebelt.
ReplacingtheHeadlightBulb
UseaGE89937Whalogenlightbulb.Donottouchthe
bulbwithyourhandsorallowdirtormoisturetocomeinto
contactwiththebulb.
1.Removethewireconnectorfromthebackofthe
headlight(Figure62).
Figure62
2.Turnthebaseofthebulbcounterclockwiseuntilit
stops(Figure63).
Figure63
3.Removethebulbstraightoutfromthebackofthe
headlight(Figure64).
Figure64
4.Insertanewbulbintothebackoftheheadlight(Figure
65).
Figure65
5.Turnthebaseofthebulbclockwiseuntilitissnug
(Figure66).
Figure66
6.Insertthewireconnectorstraightintothebackofthe
headlightuntilitissecurelyinplace(Figure67).
26