Toro Precision Soil Sensor - Menu Settings: Low Threshold

8
3. Press to select the desired soil sensor.
4. To add a sensor to a schedule:
Press or to select the desired Schedule (A, B, or C).
Press or to make the sensor active for the
selected schedule.
: Sensor is active.
-: Sensor is disabled.
In the screen above, a rain sensor is assigned to schedule B
and a soil sensor to schedule A.
5. Press until the Soil Sensor menu appears.
Menu Settings
MOISTURE NOW
is displays the current moisture level, as a percentage, of the
soil. 100% is the soil level set after the rst calibration
(see Calibrate the Sensor, page 6).
LOW THRESHOLD
is is the point at which the soil sensor will let the controller
resume irrigation of the landscape. If you were to compare the
soil to a gas tank, the “low threshold” would be the point at
which you rell the gas tank.
For a detailed explanation of the low threshold setting,
please read Appendix A of this manual.
SOIL 1
A B C
RAIN - -
WEATHER - - -
- -
SOIL 2 - - -
SENSORS
→
MOISTURE NOW 100%
LOW THRESHOLD 50%
SIGNAL STRENGTH
BATTERY LEVEL GOOD
CALIBRATE START
SOIL 1 SENSOR
→
LOW THRESHOLD