Toro Recycler 20331 - 2 Filling the Engine with Oil; Product Overview

2
FillingtheEnginewithOil
NoPartsRequired
Procedure
Important:Yourmowerdoesnotcomewithoilinthe
engine,butitdoescomewithabottleofoil.Before
startingtheengine,lltheenginewithoil.
Max.ll:20oz.(0.59l),type:SAE30detergentoilwithan
APIserviceclassicationofSF,SG,SH,SJ,SL,orhigher.
Note:Whenthecrankcaseisempty,pourabout3/4of
thecrankcasecapacityofoilinthecrankcase,thendothe
following:
1.Movethemowertoalevelsurface.
2.Removethedipstick(Figure4).
Figure4
1.Dipstick
3.Slowlypouroilintotheoillltubeuntiltheoillevel
reachestheFulllineonthedipstick(Figure4).Wait
3minutesafteraddingoiltochecktheoillevelwith
thedipstick.Donotoverll.(Max.ll:20oz.(0.59
l),type:SAE30detergentoilwithanAPIservice
classicationofSF,SG,SH,SJ,SL,orhigher.)
Important:Donotoverllthecrankcasewithoil
andruntheengine.Draintheexcessoiluntilthe
oillevelonthedipstickreadsFull.
4.Installthedipsticksecurely.
Important:
Changetheengineoilaftertherst5
operatinghours
;changeityearlythereafter.Refer
to(page).
ProductOverview
Figure5
1.Cuttingheightlever(4)
7.Recoilstarthandle
2.Sparkplug
8.Bladecontrolbar
3.Airlter(notshown)9.Self-propeldrivebar
4.Fueltankcap
10.Handleknob(2)
5.Oilll/dipstick
11.Washoutport
6.Handle
Figure6
1.Grassbag2.Sidedischargechute
5