Toro Recycler 20331 - Starting the Engine; Using the Self-Propel Drive

Adjustthecuttingheightasdesired.Setthefrontwheelsto
thesameheightastherearwheels(Figure9).
Note:Toraisethemower,moveallthecuttingheightlevers
rearward.Tolowerthemower,moveallthecuttingheight
leversforward.
Figure9
1.Raisethemower2.Lowerthemower
Note:Thecuttingheightsettingsare1inch(25mm);1-3/8
inches(35mm);1-3/4inches(44mm);2-1/8inches(54mm);
2-1/2inches(64mm);2-7/8inches(73mm);3-1/4inches
(83mm);3-5/8inches(92mm);and4inches(102mm).
StartingtheEngine
1.Holdthebladecontrolbaragainstthehandle
(Figure10).
Figure10
1.Bladecontrolbar2.Recoilstarthandle
2.Pulltherecoilstarthandlelightlyuntilyoufeel
resistance,thenpullitsharply.Allowtheropetoreturn
tothehandleslowly(Figure10).
Note:Ifthemowerdoesnotstartafterseveral
attempts,contactanAuthorizedServiceDealer.
UsingtheSelf-propelDrive
Tooperatetheself-propeldrive,squeezetheself-propeldrive
bar(Figure11)towardthehandleandholdit.
7