Toro Recycler 21467 - User Manual

Questions and Answers

A
Amanda MoranAug 17, 2025
Why my Toro Lawn Mower does not start?
- M
  Matthew FinleyAug 17, 2025
  If your Toro Lawn Mower doesn't start, it might be due to several reasons. First, ensure the battery is fully installed and latched correctly. If not, remove and replace it. Second, the battery pack may not be charged; remove it and charge it. Third, the battery pack could be damaged, requiring a replacement. Lastly, there might be an electrical problem; in this case, contact an Authorized Service Dealer.
S
Susan WilliamsAug 19, 2025
Why Toro Recycler 21467 Lawn Mower does not reach full power?
- S
  Sharon HunterAug 20, 2025
  If your Toro Lawn Mower does not reach full power, it could be due to a low battery pack charge. Remove the battery pack from the machine and fully charge it. Another possible reason is blocked air vents, so you should clean them.
M
Martha OrtizAug 22, 2025
Why my Toro Recycler 21467 Lawn Mower does not run continuously?
- S
  Sara WilliamsonAug 22, 2025
  If your Toro Lawn Mower isn't running continuously, moisture on the battery pack leads might be the issue. Allow the battery pack to dry or wipe it dry. Also, ensure the battery is fully installed in the tool by removing and replacing it, making sure it's latched.
M
Michelle WeissAug 26, 2025
How to improve the quality of cut of my Toro Lawn Mower?
- T
  Tina Wilcox DDSAug 26, 2025
  If the quality of cut of your Toro Lawn Mower is decreased or unsatisfactory, the blade may be dull; have it sharpened or replaced. Also, the cutting deck may have debris buildup, so clean under the machine.
M
Meghan PriceAug 27, 2025
Why my Toro Recycler 21467 is cutting unevenly?
- J
  Joshua KimAug 27, 2025
  If your Toro Lawn Mower is cutting unevenly, the blade may be dull, so have it sharpened or replaced. Another possibility is that the cutting deck is damaged, in which case you should contact an Authorized Service Dealer.
I
icampbellAug 30, 2025
Why does the battery pack of my Toro Recycler 21467 lose charge quickly?
- S
  stacey53Aug 30, 2025
  If the battery pack of your Toro Lawn Mower loses charge quickly, the battery pack might be outside the correct temperature range. Move it to a dry place where the temperature is between 5°C (41°F) and 40°C (104°F).
M
Margaret LopezSep 2, 2025
What to do if the LED indicator light on the battery charger of my Toro Lawn Mower is blinking red?
- D
  Dr. Heidi BrownSep 2, 2025
  If the LED indicator light on the battery charger is blinking red, there may be an error in communication between the battery and the charger, or the battery pack may be weak. Try removing the battery, unplugging the charger for 10 seconds, then plugging it back in and reinserting the battery. If the light continues to blink red, repeat the procedure. If that doesn't work, the battery pack may be weak and should be properly disposed of at a battery recycling facility.
B
bradleykevinSep 5, 2025
Why is my Toro Recycler 21467 beeping?
- E
  Eric WintersSep 5, 2025
  If your Toro Lawn Mower is producing a beeping sound, it could be due to several reasons. The battery pack may not be charged, so remove it and charge it. The machine might be in an unsafe position, so ensure it's not at an extreme angle. It could also be overloaded, so try cutting the grass at a higher setting or walking slower. If none of these solutions work, there may be an electrical problem. Try the other troubleshooting steps, and if the beeping continues, contact an Authorized Service Dealer.
C
Cindy HoldenSep 8, 2025
Why the battery charger of my Toro Recycler 21467 is not working?
- J
  Jessica WrightSep 8, 2025
  If the battery charger is not working, it could be due to the temperature being too high or too low. Unplug the charger and move it to a dry place where the temperature is between 5°C (41°F) and 40°C (104°F). It's also possible the outlet doesn't have power, so contact a licensed electrician to repair it.
C
Cindy FriedmanSep 12, 2025
What does it mean if the LED indicator light on the battery charger of my Toro Recycler 21467 is red?
- D
  davidwoodwardSep 12, 2025
  If the LED indicator light on the battery charger is red, it means the charger or battery pack is outside the correct temperature range. Unplug the charger and move both the charger and battery pack to a dry place where the temperature is between 5°C (41°F) and 40°C (104°F).

Summary

Introduction

Safety-Alert Symbol

Explains the safety-alert symbol and its associated danger levels.

Safety Instructions

Operator Training and Responsibility

States operator's responsibility for accidents and training requirements.

Preparation for Safe Operation

Covers pre-operation checks, safety devices, and environment preparation.

Safe Operation Procedures

Details safe operation procedures, including blade contact and starting.

Maintenance and Storage

Routine Maintenance and Storage Care

Discusses storage conditions and battery handling for safety.

Safety Decals and Identification

Explains the importance and location of safety and instructional decals.

Setup and Assembly

Mounting the Battery Charger

Instructions for mounting the battery charger.

Unfolding Handle and Assembling Grass Bag

Guides for unfolding the handle and assembling the grass bag.

Product Overview

Technical Specifications

Lists technical specifications for the battery pack and charger.

Attachments and Accessories

Information on approved attachments and accessories.

Operation

Pre-Operation Checks and Battery Installation

Key steps before operating and installing the battery pack.

Starting the Machine and Adjustments

Guides for starting the mower and adjusting cutting height.

Drive System and Clipping Management

Using self-propel drive and managing grass clippings.

Bagging and Shutting Down

Instructions for bagging, operating lever, and shutting off the machine.

Battery Removal Procedure

Procedure for removing the battery pack from the machine.

Operating Tips

General Mowing Best Practices

General advice for mowing effectively and safely.

Specific Mowing Techniques

Tips for cutting grass and leaves efficiently.

After Operation

Battery Charging and Status Indicators

Instructions for charging the battery pack and interpreting indicators.

Cleaning and Storage Preparation

Guides for cleaning the machine and preparing for storage.

Vertical Storage Method

Guide for storing the machine vertically to save space.

Detailed Maintenance

Blade Replacement

Detailed steps for replacing the mower blade.

Self-Propel Drive Adjustment

How to adjust the self-propel drive cable tension.

California Proposition 65 Information

This document is an operator's manual for the Toro Flex-Force Power System™ 60V MAX 21in Recycler® Lawn Mower. It covers Model No. 21467 and 21467T, with serial numbers 400000000 and Up.

Function Description:

This rotary-blade, walk-behind lawn mower is intended for use by residential homeowners. Its primary function is cutting grass on well-maintained lawns on residential properties. It is designed to use Toro 60V lithium-ion battery packs, which are to be charged only by Toro 60V lithium-ion battery chargers. The mower is not designed for cutting brush or for agricultural uses. Model 21467T does not include a battery or a charger.

Important Technical Specifications:

Battery Pack (Model 88660):
- Battery pack capacity: 6.0 Ah
- Energy: 324 Wh
- Battery manufacturer rating: 60V maximum and 54V nominal (actual voltage varies with load).
Battery Charger (Model 88602):
- Type: 60V MAX Lithium-Ion Battery Charger
- Input: 120V AC ~2.0A, 60Hz
- Output: 60V DC 2.0A MAX
Appropriate Temperature Ranges:
- Charge/store battery pack: 5°C (41°F) to 40°C (104°F)
- Use battery pack: -30°C (-22°F) to 49°C (120°F)
- Use machine: 0°C (32°F) to 49°C (120°F)
Cutting Height: Adjustable from 25 mm (1 inch) to 102 mm (4 inches).
Blade Bolt Torque: 68 N·m (50 ft-lb).

Usage Features:

Safety-Alert Symbol: The manual prominently features a safety-alert symbol to highlight important safety messages, categorized as DANGER, WARNING, or CAUTION.
Pre-Operation Checks: Users are instructed to read all instructions, keep bystanders away, ensure all guards and safety devices are in place, inspect the area for objects, check the blade assembly for wear/damage, and use only Toro-specified battery packs and chargers.
Battery Installation: The battery pack is installed by opening the battery-compartment lid, aligning the cavity with the tongue on the machine, sliding the pack into place until it locks, and then closing the lid.
Starting the Machine: Requires inserting the electric-start button, squeezing the blade-control bar to the handle, and pressing the electric-start button until the motor starts.
Self-Propel Drive: The machine automatically keeps pace with the user when walking with hands on the upper handle. If the machine does not roll backward freely, users can push it forward slightly to disengage the wheel drive.
Recycling Clippings: The machine is factory-ready for recycling grass and leaf clippings.
Bagging Clippings: A grass bag can be installed by raising the rear deflector, placing the bag pins in the handle notches, and lowering the deflector.
Bag-on-Demand Lever: This feature allows switching between collecting and recycling clippings while the grass bag is attached. Pressing the button and moving the lever forward engages bagging, while moving it rearward engages recycling.
Adjustable Cutting Height: The cutting height can be adjusted, with all wheels needing to be set to the same height.
General Mowing Tips: Advice includes avoiding solid objects, installing a new blade for best performance, cutting about a third of the grass blade at a time, avoiding cutting below 51 mm (2 inches) unless grass is sparse or in late fall, mowing tall grass at higher settings first, avoiding wet conditions, being aware of fire hazards in dry conditions, and alternating mowing direction for even fertilization.
Cutting Leaves: Tips include ensuring half of the lawn shows through the cut leaf cover, mowing at higher settings for thick leaf layers, and slowing down mowing speed for finer cuts.
Battery Charge Indicator: The battery pack has a button to display the current charge via LED indicators.
Battery Charger LED Indicator: The charger has an LED light to indicate charging status (green blinking for charging, solid green for fully charged, red for temperature range issues, red blinking for charging fault).

Maintenance Features:

Cleaning Under the Machine: Recommended after each use. Involves moving the machine to a flat paved surface, removing the electric-start button and battery, washing out clippings from under the rear door, and running the motor for a few minutes to dry the underside.
Vertical-Stow Position: The machine can be stored vertically to minimize space, requiring the cutting height to be 92 mm (3-5/8 inches) or lower, disengaging handle locks, folding the handle forward, engaging locks, and lifting the front of the machine.
Lubrication: The machine does not require lubrication as all bearings are factory-lubricated for life.
Blade Replacement: Recommended yearly. Requires a torque wrench for proper installation. Instructions include holding the blade steady with a block of wood, removing the old blade, installing the new blade with curved ends facing up, and tightening the blade bolt to 68 N·m (50 ft-lb).
Self-Propel Drive Adjustment: If a new self-propel cable is installed or the drive is out of adjustment, the cable tension can be adjusted by loosening a nut, pulling/pushing the cable to increase/decrease traction, and then tightening the nut.
Battery Pack Recycling: Upon removal, terminals should be covered with heavy-duty adhesive tape. Lithium-ion battery packs with the Call2Recycle seal can be recycled at participating facilities.
Storage: The machine, battery pack, and charger should be stored in a dry, secure place within appropriate temperature ranges, out of reach of children, and away from corrosive agents. For off-season storage, the battery pack should be charged until 2 or 3 LED indicators turn green. The battery pack should not be stored fully charged or fully depleted for long periods.
Troubleshooting Guide: Provides solutions for common issues such as the machine not starting, not running continuously, not reaching full power, battery losing charge quickly, battery charger not working, and the machine producing a beeping sound or vibrating.