To Next PageTo Next PageWhy my Toro Recycler 21566T does not start?
If your Toro Lawn Mower isn't starting, ensure the battery is fully installed and latched. If that's not the issue, the battery pack may need charging or replacement. If problems persist, it could indicate an electrical issue requiring assistance from an Authorized Service Dealer.
Why is bagging decreased on my Toro Lawn Mower?
If the bagging performance of your Toro Lawn Mower is decreased, it could be due to overloading the machine. Try cutting the grass at a higher setting or walking slower while mowing.
What to do if my Toro Recycler 21566T does not run continuously?
If your Toro Lawn Mower doesn't run continuously, check if there is moisture on the battery pack leads; if so, allow them to dry or wipe them. Also, ensure the battery is fully installed and latched correctly.
Why Toro Lawn Mower does not reach full power?
If your Toro Lawn Mower isn't reaching full power, the battery pack charge might be too low. Remove the battery and fully charge it. Also, check if the air vents are blocked and clean them if necessary.
How to improve the cut quality of my Toro Recycler 21566T?
If the quality of cut from your Toro Lawn Mower is decreased, the blade may be dull and need sharpening or replacing. Additionally, debris buildup on the cutting deck could be the cause; clean under the machine to resolve this.
Why is my Toro Lawn Mower cutting unevenly?
If your Toro Lawn Mower is cutting unevenly, the blade might be dull and need sharpening or replacement. Alternatively, the cutting deck could be damaged, requiring you to contact an Authorized Service Dealer.
Why does the battery pack on my Toro Lawn Mower lose charge quickly?
If the battery pack on your Toro Lawn Mower loses charge quickly, it might be too hot or cold. Move it to a dry place where the temperature is between 5°C (41°F) and 40°C (104°F).
What to do if the LED indicator light on my Toro Recycler 21566T Lawn Mower battery charger is blinking red?
If the LED indicator light on your Toro Lawn Mower battery charger is blinking red, it could be due to a communication error between the battery and charger, or the battery pack may be weak. First, remove the battery, unplug the charger for 10 seconds, then plug it back in and reattach the battery. Repeat this once. If it continues blinking red, dispose of the battery at a recycling facility.
Why is my Toro Lawn Mower making a beeping sound?
If your Toro Lawn Mower is producing a beeping sound, it could be due to several reasons. The battery pack might need charging. Ensure the mower isn't at an extreme angle. Overloading the machine can also cause beeping, so try cutting at a higher setting or walking slower. If the beeping continues after these steps, it may indicate an electrical problem, and you should contact an Authorized Service Dealer.
Why is my Toro Recycler 21566T Lawn Mower battery charger not working?
If the battery charger for your Toro Lawn Mower isn't working, it might be too hot or cold. Unplug it and move it to a dry place where the temperature is between 5°C (41°F) and 40°C (104°F). Also, check if the outlet has power by contacting a licensed electrician.
General| Engine Displacement | 163 cc |
|---|---|
| Cutting Width | 21 inches |
| Deck Material | Steel |
| Start Type | Recoil |
| Self-Propelled | Yes |
| Fuel Capacity | 0.25 gallons |
| Grass Disposal | Bag/Mulch/Side Discharge |
| Engine | Briggs & Stratton |
| Cutting Height | 1.5 - 4 inches |
| Cutting Height Range | 1.5 - 4 inches |
Operator responsibilities, training, and safe preparation before using the mower.
Essential safety procedures and warnings during machine operation.
Guidelines for maintaining, cleaning, and storing the mower safely.
Indicates the blade's origin and provides model number details.
Explains various safety decals related to operation and potential hazards.
Decals related to battery pack information and mower speed settings.
Explains the meaning of LED indicators on the battery charger.
Details on the battery charger label, including model and compliance marks.
A warning about inspecting and replacing the grass catcher assembly.
Instructions on how to start and shut off the mower using its controls.
Step-by-step guide for mounting the battery charger securely on a wall.
Instructions and warnings for unfolding the mower's handle safely.
Steps to install the blade-control bar on the mower.
Instructions for assembling and attaching the grass bag to the mower.
Identifies and labels the main parts of the lawn mower.
Shows and describes the grass bag, blades, and rear plug.
Identifies the battery charger and battery pack models.
Details on battery pack and charger models, capacity, and operating temperature ranges.
Information on available Toro approved attachments and accessories.
Step-by-step guide for installing the battery pack into the mower.
Steps to adjust the handle height to a comfortable position.
Instructions and visual guide for setting the mower's cutting height.
Procedure for starting the Toro lawn mower using the electric start.
Instructions on how to operate the self-propel drive feature of the mower.
Explains the AUTO and MAX blade speed settings and how to adjust them.
Steps to safely turn off the lawn mower.
Instructions on how to set up the mower for recycling grass clippings.
Detailed steps for installing the grass bag for collecting clippings.
Steps for removing the grass bag and battery pack from the mower.
Tips for mowing grass and cutting leaves effectively.
Step-by-step guide to charging the battery pack and interpreting LED indicators.
Instructions for cleaning the mower in different positions.
Steps to safely fold the mower's handle for storage.
Detailed steps for storing the mower in a vertical position to save space.
Schedule outlining maintenance tasks after each use and yearly.
Step-by-step instructions for replacing the mower blade, including safety warnings.
Instructions for adjusting the self-propel drive cable for proper operation.
Guidelines for preparing the battery pack for recycling and locating facilities.
Instructions for storing the machine and battery pack safely and appropriately.
Troubleshooting steps for when the machine does not start or run continuously.
Troubleshooting steps for battery pack and charger problems, including LED indicator lights.
Troubleshooting for issues like beeping sounds, cut quality, bagging, and vibration.
Explains what Proposition 65 warnings mean and their application to products.
