Overview of the InfoCenter Display (continued)
Machine Settings
Menu Item Description
Front Backlap Controls the speed of the front reels in backlap
mode.
Rear Backlap Controls the speed of the rear reels in backlap
mode.
Mow Speed Controls the maximum speed while in mow (low
range). This is used for determining the reel
speed.
Transport Speed Controls the maximum speed while in transport
(high range).
Blade Count Controls the number of blades on the reel for
reel speed.
Height of cut (HOC) Controls the height of cut (HOC) for determining
the reel speed.
Front Reel Speed Displays the calculated reel speed position for
the front reels. The reels can also be manually
adjusted.
Rear Reel Speed Displays the calculated reel speed position for
the rear reels. The reels can also be manually
adjusted.
Eco Mode When activated, the Economy Mode lowers the
engine speed while mowing to reduce noise and
fuel consumption. The reel speed does not
change, but the mow speed is decreased if the
mow stop is not adjusted accordingly.
Smart Power Turns Smart Power on and off.
Acceleration Low, Medium, and High settings control how
quickly the traction speed reacts when you
move the traction pedal.
About
Menu Item Description
Model Lists the model number of the machine.
SN Lists the serial number of the machine.
S/W Revision Lists the software revision of the primary
controller.
InfoCenter S/W Revision Lists the software revision of the InfoCenter.
3464-482A Page 5–9 Operation: Before Operation
To Next Page
Loading...
