Toro SnowMaster 724 ZXR - Installing the Discharge Chute; Checking the Engine-Oil Level; Checking the Tire Pressure

2
InstallingtheDischargeChute
Partsneededforthisprocedure:
1
Bolt(1/4-20X1–1/2inches)
1
Washer-facedlocknut(1/4-20inch)
Procedure
Insertthechutepostthroughthebracketintothebaseofthe
machineandsecureitusingaboltandalocknut(Figure5).
Figure5
1.Chutepost3.Washer-facedlocknut
(1/4-20inch)
2.Bolt(1/4-20X1–1/2
inches)
4.Bracket
3
CheckingtheEngine-OilLevel
NoPartsRequired
Procedure
Note:Yourmachinecomeswithoilintheenginecrankcase.
Beforestartingtheengine,checktheoillevelandaddoilif
necessary.
RefertoCheckingtheEngine-OilLevel(page12).
4
CheckingtheTirePressure
NoPartsRequired
Procedure
Thetiresareoverinatedatthefactoryforshipping.Reduce
thetirepressureequallyinbothtirestobetween103and137
kPa(15and20psi).
6