Toro Super Recycler 20062 - Side-Discharging the Clippings

Installing the Grass Bag
1. Raise and hold up the rear door ( Figure 25 ).
Figure 25
2. R emo v e the rear disc harg e plug ( Figure 25 ).
3. Install the bag onto the door rod ( Figure 26 ).
Figure 26
4. Lo w er the rear door ( Figure 27 ).
Figure 27
Removing the Grass Bag
T o remo v e the bag, rev erse the ste ps abo v e .
Side-discharging the Clippings
Use the side disc harg e for cutting v er y tall g rass .
If the bag is on the mo w er , remo v e it and inser t the rear
disc harg e plug (refer to R emo ving the Grass Bag) before
side-disc harging the clippings .
Important: Ensur e that the r ear discharge plug is in
place bef or e y ou r ecy cle the clippings ( Figur e 28 ).
Figure 28
T he blade is shar p; contacting the blade can r esult
in serious per sonal injur y .
Stop the engine and w ait f or all mo ving par ts to stop
bef or e lea ving the operating position.
Installing the Side Discharge Chute
1. Unloc k the side disc harg e door ( Figure 29 ).
10