Toro Super Recycler 20062 - Removing the Mower from Storage

Figure 43
Note: Attac h the lo w er handle knobs onto the bolts in
the handle to prev ent losing them.
2. Detac h the lo w er handle brac k ets from the lo w er end of
both handle sides ( Figure 43 ).
3. R otate the handle forw ard ( Figure 44 ).
Important: R oute the ca bles to the outside of the
handle knobs as y ou f old the upper handle.
Figure 44
4. T o unfold the handle , refer to Unfolding the Handle .
Removing the Mower from
Storage
1. R emo v e the spark plug and spin the engine rapidly using
the star ter to blo w the ex cess oil from the cylinder .
2. Install the spark plug and tighten it with a tor que
wrenc h to 15 ft-lb (20 N ⋅ m).
3. Charg e the batter y .
4. Connect the wire to the spark plug .
16