Figure 21
4. If the mo w er does not star t in 1 or 2 pulls (or 5 seconds
using the electric star ter), press the primer button 1 or 2
times and tr y star ting it ag ain.
Note: If the mo w er still does not star t, contact an
A uthorized Ser vice Dealer .
Using the Self-propel Drive
T o operate the self-propel dri v e , simply w alk with y our
hands on the upper handle and y our elbo ws at y our sides ,
and the mo w er will automatically k ee p pace with y ou
( Figure 22 ).
Figure 22
Stopping the Engine
R elease the blade control bar ( Figure 23 ).
Important: W hen y ou r elease the blade contr ol bar ,
the blade should stop within 3 seconds. If it does not
stop pr oper l y , stop using y our mo w er immediatel y and
contact an Authoriz ed Ser vice Dealer .
Figure 23
Recycling the Clippings
Y our mo w er comes from the factor y ready to recycle the
g rass and leaf clippings bac k into the la wn.
If the g rass bag is on the mo w er , remo v e it (refer to
R emo ving the Grass Bag) before recycling the clippings . If
the side disc harg e c hute is on the mo w er , remo v e it and
loc k the side disc harg e door (refer to R emo ving the Side
Disc harg e Chute) before recycling the clippings .
Important: Ensur e that the r ear discharge plug is in
place bef or e y ou r ecy cle the clippings ( Figur e 24 ).
Figure 24
Bagging the Clippings
Use the g rass bag when y ou w ant to collect g rass and leaf
clippings from the la wn.
A w or n g rass ba g could allo w small stones and
other similar de bris to be thr o wn in the operator’ s or
bystander’ s dir ection and r esult in serious per sonal
injur y or death to the operator or bystander s.
Check the g rass ba g fr equentl y . If it is dama ged,
install a new T or o r eplacement ba g .
If the side disc harg e c hute is on the mo w er , remo v e it and
loc k the side disc harg e door (refer to R emo ving the Side
Disc harg e Chute) before bag ging the clippings .
T he blade is shar p; contacting the blade can r esult
in serious per sonal injur y .
Stop the engine and w ait f or all mo ving par ts to stop
bef or e lea ving the operating position.
9
To Next Page
Loading...
