To Next PageTo Next Page
Need help?Do you have a question about the Toro TimeCutter Z4235 and is the answer not in the manual?
General| Cutting Width | 42 inches |
|---|---|
| Transmission | Hydrostatic |
| Fuel Capacity | 3 gallons |
| Turning Radius | Zero-turn |
| Warranty | 3-year limited |
| Deck Material | 13 ga Steel |
| Blade Tip Speed | 18, 000 fpm |
| Cutting Height | 1.5 - 4.5 inches |
| Speed | 7 mph forward, 3 mph reverse |
Operational guidelines based on ANSI standard B71.1-2003 for safe machine use.
Precautions and techniques for safe operation on inclines and slopes.
How the safety interlock system prevents starting or stops the engine.
Instructions for testing the safety interlock system's operational integrity.
Procedure to check the engine oil level before operating the machine.
Procedures for inspecting, servicing, and handling mower blades.
Procedure for adjusting the mower deck's side-to-side level.
Troubleshooting common engine issues like overheating, starting, and power loss.
Troubleshooting vibration, cutting, blade rotation, and drive issues.
