Toro TimeCutter Z5030 - Page 9

0
0
0
0
N(Q)
0
112-9751
1. Parking position 4. Neutral
2. Fast 5. Reverse
3. Slow
1. Height-of-cut
112-9802
115-2501
114-8531
1. Bypass lever position for 2. Bypass lever position for
operating the machine pushing the machine
1. Fast
2. Continuous variable
setting
3. Stow
4. Choke
5. Power take-off (PTO),
Blade control switch on
some models
6. Blade control switch--Off
7. Blade control switch--On
O
1. Parking position
2. Fast
3. Slow
(Q) N
112-9750
4.
5.
0
0
0
0
Neutral
Reverse
1,
114-8532
Bypass lever position for 2. Bypass lever position for
operating the machine pushing the machine
0 0 0 0 0
0 0 0 0 0
Battery Symbols
Some or all of these symbols
Q
are on your battery
1. Explosion hazard 6. Keep bystanders a safe
distance from the battery.
2. No fire, open flame, or 7. Wear eye protection;
smoking, explosive gases can
cause blindness and other
injuries
3. Caustic liquid/chemical 8. Battery acid can cause
burn hazard blindness or severe burns.
4. Wear eye protection 9. Flush eyes immediately
with water and get medical
help fast.
5. Read the Operator's 10. Contains lead; do not
Manual. discard.