Toro TimeCutter ZX 17-44 - Mower Decks - Blade Height Adjustment; Adjusting Front Trunion Rods for Blade Height

7 - 10 TimeCutter™ Z Service Manual
MOWER DECKS
7
Use a blade height gauge to measure the blade
height at the front of the center blade and at the
rear of the side blades.
Adjust the front trunion rods until the front blade
tip is 1/16” - 5/16” (1.6 - 7.9 mm) lower than the
rear. Tighten the jam nuts.
0702-0712
0702-0713