Moving a Non-Functioning Machine (continued)
5. Disengage the parking brake by moving both motion-control levers down to the center,
unlocked position.
Note: Do not start the machine.
6. Move the machine as required.
IMPORTANT
Always push the machine by hand. Do not tow the machine, because towing may
damage it.
7. Move the motion-control levers outward to the P
ARK position.
8. Move both bypass levers rearward and over through the slotted hole to lock them in
place
.
Maintenance: Pre-Maintenance Procedures Page 5–4 3464-634 A
To Next Page
Loading...
