Replacing the Grass Deflector (continued)
G456086
Rod
Grass deflector
Spring
Deck brackets
Cotter pin
Spring installed over the rod
4. Remove the damaged or worn grass deflector.
5. Position the new discharge deflector with the bracket ends between the welded brackets
on the deck as shown.
G456085
Rod and spring assembly installed
Loop end of the spring installed into
the notch of the deflector bracket
Rod, short end, moved behind the
mower bracket
Short end, retained by mower
bracket
Cotter pin
Maintenance: Mower-Deck Maintenance Page 5–32 3464-634 A
To Next Page
Loading...
