Toro TITAN HD 2000 Series - Disengage the Blade-Control Switch (PTO) and Engage the Parking Brake; Shut off the Engine, Remove the Key, and Wait for All Moving Parts to Stop before Leaving the Operating Position

2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
Note:Ensurethattheengineiscoolsothatthe
oilhashadtimetodrainintothesump.
3.Tokeepdirt,grassclippings,etc.,outofthe
engine,cleantheareaaroundtheoil-llcapand
dipstickbeforeremovingit(Figure50).
g027515
Figure61
ChangingtheEngineOilandtheEngine-Oil
Filter
ServiceInterval:Every100hours—ForKohler
engines—changetheengineoiland
theengine-oillter.
Note:Thedrainplugisattachedtothedrainhose.
1.Parkthemachinesothatthedrainsideisslightly
lowerthantheoppositesidetoensurethatthe
oildrainscompletely.
2.Disengagetheblade-controlswitch(PTO)and
engagetheparkingbrake.
3.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
4.Draintheoilfromtheengine.
g027934
Figure62
5.Torquetheplugto14N·m(125in-lb).
49