Toro TITAN HD 2000 Series - Replacing the Mower Belt for Rear-Discharge Mower Decks

g036865
Figure95
2500SeriesMowerDecks
1.Clutchpulley
4.Ratchet
2.Mowerbelt
5.Squareholeintheidler
armfortheratchet
3.Spring-loadedidlerpulley
8.Installtheidlerspring(Figure93orFigure95).
Note:Seatthespringendsintheanchor
grooves.
9.Installthebeltcovers(Figure96).
g027730
Figure96
ReplacingtheMowerBelt
forRear-DischargeMower
Decks
ReplacingtheCounter-Rotating
Belt
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch(PTO),andengagethe
parkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Lowerthemowertothe76mm(3inches)height
ofcut.
4.Lifttheoorpanuptogainaccesstothecenter
pulley.
5.Removetheplasticbeltcover(Figure98).
6.Removethe3boltsholdingthemetalbeltcover
inplaceandremovethemetalbeltcover.
g024145
Figure97
1.Idlerspring4.Idlerpulley
2.Counter-rotatingbelt5.Squareholeintheidler
armfortheratchet
3.Doublepulley
7.Usearatchetinthesquareholeintheidlerarm
toremovetensionontheidlerspring(Figure97).
8.Removethebeltfromthemowerdeckpulley
(Figure97).
67