Toro TITAN HD Series User Manual

FormNo.3407-539RevA
TITAN
®
HDSeriesRidingMowers
ModelNo.Allmodels
SetupInstructions
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Removethemachinefromthecrate.
2
Nopartsrequired
–
Addfueltothemachine.
3
Nopartsrequired
–
Checktheengine-oillevel.
4
Nopartsrequired
–
Servicethehydraulicoil.
5
Nopartsrequired
–
Checkthetirepressure.
6
Nopartsrequired
–
Servicingthebattery.
7
Nopartsrequired
–
Raisetherolloverprotectionsystem
(ROPS).
8
Nopartsrequired
–
Checkthegrassdeector.
9
No.2lithiumormolybdenum-based
grease(purchaseseparately)
1tube
Checkthemachineforgrease.
Locknut(3/8inch)
3
10
Carriagebolt(3/8x2-1/4inches)
3
Installtherightbumper(reardischarge
modelsonly).
11
Nopartsrequired
–
Checkthemoweradjustment.
12
Nopartsrequired
–
Checkthemachinebeforedeliveryto
thecustomer(allmachines).
Operator'sManual
1
Engineowner'smanual(non-Toro
engines)
1
Operator-trainingmaterial
1
Key2
13
Registrationcard1
Deliverthemachinetothecustomer(all
machines).
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
©2016—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3407-539*A

Toro TITAN HD Series Specifications

General

Ground Speed (Forward)	10 mph
Blade Engagement	Electric PTO
Engine Displacement	747 cc
Speed Range	0-10 mph
Cutting Width	60 inches

Summary

Setup Instructions

Removing the Machine from the Crate

Safely remove the riding mower from its shipping crate following these instructions.

Adding Fuel to the Machine

Instructions for correctly adding fuel to the mower before starting.

Checking the Engine-Oil Level

Procedure to verify the engine oil level in the crankcase before operation.

Servicing the Hydraulic Oil

Guide on checking and servicing the machine's hydraulic fluid level.

Checking the Tire Pressure

Steps to ensure proper tire inflation for safe and effective operation.

Servicing the Battery

Guidance on charging and connecting the mower battery safely, including warnings.

Raising the Rollover Protection System (ROPS)

Instructions for deploying the ROPS to its operating position securely.

Checking the Grass Deflector

How to check and install the grass deflector for safe operation and to prevent object ejection.

Checking the Machine for Grease

Procedure to verify the machine is properly greased as per lubrication guidelines.

Installing the Right Bumper

Step-by-step guide for attaching the right bumper to the mower.

Checking the Mower Adjustment

How to verify and adjust the mower deck level and front-to-rear blade slope.

Checking the Machine Before Delivery to the Customer (All Machines)

Comprehensive checklist for pre-delivery inspection of the mower.

Delivering the Machine to the Customer (All Machines)

Final steps, documentation, and customer orientation for machine delivery.