Toro TS120 User Manual

19
Fitting the control unit
• When buying a replacement part, the control unit is supplied with plug-and-socket connections. Push
hoses into plug-in grommets as far as they will go and ensure that the mounting ring springs back.
• Screw in coil.
• Clip control unit into protective casing.
• Secure housing cover using all three screws. (2 screws for TC version.)
• Check sprinkler is working properly as per point 6.2.

Toro TS120 Specifications

General

Brand	Toro
Model	TS120
Category	Irrigation System
Language	English