14
The following points 6.3, 6.4 and 6.5 should ideally be carried out with the sprinkler
running. First fold out the safety catch to the side of the sprinkler head (below) so that no
limbs (e.g. ngers) can get jammed if the sprinkler should unexpectedly close.
No special procedures are needed to set the sprinkler. All you need to set are the sprinkler’s rotational
speed and, when using it in back-and-forth mode, the arc to be watered.
Safety catch
folded in
Safety catch
folded out
Cover
Sprinkler head
Housing
To Next Page
Loading...
