Toro TurfMaster 22205TE User Manual (English)

Questions and Answers:

R
raymondtrevinoAug 31, 2025
What to do if Toro Lawn Mower blades do not rotate or they slip?
- S
  Stephanie RiceAug 31, 2025
  If the blades on your Toro Lawn Mower do not rotate or slip, the BBC belt or the timing belt may be worn, loose, or broken; adjust the BBC cable and the timing belt tension, and replace them if necessary. Also, check if the BBC belt is off the pulley, and inspect it for damage, replacing it if needed. The BBC cable itself may also be worn, loose, or broken, so adjust it or replace it as necessary.
T
Timothy GordonAug 30, 2025
Why my Toro Lawn Mower does not self-propel?
- L
  longjoelAug 31, 2025
  If your Toro Lawn Mower does not self-propel, the self-propel drive cable may be out of adjustment or damaged; adjust it or replace it if necessary. Check for and remove any debris in the belt area. If the belt is damaged, replace it.
C
Cheryl KingAug 30, 2025
Why my Toro TurfMaster 22205TE has an uneven cutting pattern?
- S
  Sylvia MartinAug 30, 2025
  If your Toro Lawn Mower has an uneven cutting pattern, ensure all four wheels are at the same height. Sharpen and balance the blades, and vary your mowing pattern instead of repeatedly mowing in the same direction. Clean any clippings and debris from the underside of the machine housing. If the blade spindle is bent, contact an Authorized Service Dealer.
G
Gail MurrayAug 29, 2025
How to fix Toro TurfMaster 22205TE Lawn Mower engine running rough?
- S
  sotokatrinaAug 29, 2025
  If your Toro Lawn Mower engine is running rough, make sure the wire is securely connected to the spark plug. Inspect the spark plug itself; adjust the gap if necessary, or replace it if it's pitted, fouled, or cracked. Ensure the throttle lever is in the Fast position. Check the air filter; if it's dirty and restricting airflow, clean the air filter pre-cleaner and/or replace the paper filter. Finally, a dirty fuel filter can also cause this, so replace it and clean the in-tank filter screen.
M
millerjesseAug 27, 2025
What to do if my Toro TurfMaster 22205TE does not self-propel?
- R
  Richard HillAug 27, 2025
  If your Toro Lawn Mower isn't self-propelling, the issue might be with the self-propel drive cable; adjust it or replace it if damaged. Also, make sure to clean any debris from the belt area. If the belt is damaged, replace it.
K
Kelly WatkinsAug 27, 2025
What to do if my Toro TurfMaster 22205TE engine runs rough?
- W
  Whitney BuckleyAug 27, 2025
  A rough-running engine in your Toro Lawn Mower could be due to a few reasons. First, make sure the wire is securely connected to the spark plug. Next, inspect the spark plug for pitting, fouling, or an incorrect gap, adjusting or replacing it as necessary. Ensure the throttle lever is in the Fast position. Check the air filter element; if it's dirty and restricting airflow, clean the air filter pre-cleaner and/or replace the paper filter. Lastly, replace the fuel filter and clean the in-tank filter screen to address any dirt in the fuel filter.
D
deborahdavisAug 26, 2025
How to start a Toro TurfMaster 22205TE when the engine doesn't start?
- B
  Briana RogersAug 26, 2025
  If your Toro Lawn Mower engine isn't starting, several factors could be at play. First, ensure your fuel tank isn't empty or filled with stale fuel; if so, replenish it with fresh gasoline. Next, verify that the fuel shutoff valve is open. Also, check that the throttle lever is in the Choke position. Inspect the spark plug for any signs of pitting, fouling, or incorrect gap, adjusting or replacing it as needed. Lastly, examine the fuel filter for dirt, replacing it and cleaning the in-tank filter screen if necessary.
R
rodriguezaaronAug 25, 2025
Why isn't my Toro TurfMaster 22205TE self-propelling?
- J
  Jacob SmithAug 26, 2025
  If your Toro Lawn Mower isn't self-propelling, the self-propel-drive cable may be out of adjustment or damaged; adjust it, and replace it if necessary. Also, check for and clean any debris in the belt area. Finally, inspect the belt and replace it if it's damaged.
Q
qsinghAug 25, 2025
Why won't my Toro TurfMaster 22205TE Lawn Mower engine start?
- S
  sean08Aug 25, 2025
  There are several reasons why your Toro Lawn Mower engine might not be starting. It could be due to an empty fuel tank or stale fuel in the system; in this case, drain the tank and refill it with fresh fuel. Another common cause is a closed fuel-shutoff valve, so make sure to open it. The throttle lever might not be in the correct position, so move it to the CHOKE position. Also, ensure the wire is securely connected to the spark plug. Finally, the spark plug might be faulty, so check it and adjust the gap if needed, or replace it if pitted, fouled, or cracked. If there is dirt in the fuel filter, replace the fuel filter and clean the in-tank filter screen.

Toro TurfMaster 22205TE Specifications

General

Brand	Toro
Model	TurfMaster 22205TE
Category	Lawn Mower
Language	English

Summary

Introduction to Toro Walk-Behind Mower Operation

Safety-Alert Symbol

Identifies hazards that may cause serious injury or death if precautions are not followed.

Product Identification and Serial Numbers

Locating model and serial numbers for product identification and service.

Key Terminology in Manual

Highlights special mechanical and general information using 'Important' and 'Note'.

General Safety Precautions for Mower Operation

General Safety Guidelines

Essential safety rules for operating the mower to prevent injury and damage.

Safety and Instructional Decals

Importance of visible and undamaged safety decals for operator awareness.

Understanding Safety Decals and Symbols

Thrown Object Hazard Warning

Warning about keeping bystanders away from thrown objects.

Cutting and Dismemberment Hazard

Warning about keeping hands and feet away from moving parts.

Operator Training and Guards

Emphasizes operating only when trained and with guards in place.

Safe Mowing on Slopes

Guidelines for safe mowing on slopes and near hazards.

Identification of Hazard Symbols

Explanation of various hazard symbols like fire, toxic gas, and hot surface.

Key Safety Decals and Controls Identification

Moving Parts and Guard Safety

Warning to stay away from moving parts and keep guards in place.

Parking on Slopes Safety

Warning against parking on slopes unless wheels are chocked.

Cutting Height Adjustment Controls

Illustrates front and back height-of-cut adjustment settings.

Throttle Lever Operation

Identification and function of choke, fast, slow, and stop positions.

Setting Up the Toro Walk-Behind Mower

Installing the Mower Handle

Procedure for attaching and securing the mower handle.

Adjusting Handle Height

Steps to adjust the handle to a comfortable operating height.

Filling Engine Oil and Initial Checks

Filling the Engine with Oil

Detailed instructions for adding the correct amount of engine oil before first use.

Checking Engine Oil Level

Procedure for checking oil level using the dipstick.

Engine Oil Specifications

Specifies oil capacity, viscosity, and API classification required for the engine.

Assembling the Grass Bag

Step-by-step guide to attach the grass bag to the mower frame.

Toro Mower Product Overview and Controls

Mower Component Identification

Diagram identifying key parts of the mower, like spark plug, air filter, and levers.

Control Bar and Throttle Operation

Explanation of the control bar and throttle lever functions.

Toro Mower Specifications

Technical specifications including weight, length, width, and height.

Operating the Toro Mower: Before Operation

Before Operation Safety Checks

Crucial safety checks and precautions before starting the engine.

Fuel Safety Guidelines

Warnings and guidelines for safe handling and storage of gasoline.

Filling the Fuel Tank

Procedure for safely filling the fuel tank with the correct gasoline type.

Engine Oil and Cutting Height Checks

Checking Engine-Oil Level

Daily procedure to check engine oil level using the dipstick.

Adjusting Cutting Height

How to adjust the mower deck height using front and rear levers.

Blade System Operation and Safety

Checking Blade-Stop System Operation

Procedure to verify the blade-stop system functions within 3 seconds.

Blade-Stop Test Without Grass Bag

Instructions for testing blade-stop without the grass bag.

During Operation Safety Rules

General safety rules and specific warnings for operating the mower.

Safe Operation Practices and Starting Engine

Slope Safety Precautions

Precautions for mowing on slopes and near edges.

Starting the Engine

Step-by-step guide to start the mower's engine.

Shutting Off the Engine

Procedure for safely stopping the mower engine.

Operating Self-Propel Drive and Cutting Blades

How to engage the self-propel drive and cutting blades.

Engaging Drive and Brakes

Disengaging the Parking Brake

Procedure for releasing the parking brake.

Engaging and Disengaging the Parking Brake

Steps to engage and disengage the parking brake.

Preparing for Clipping Recycling

Instructions on preparing the mower for mulching clippings.

Clipping Management: Bagging and Side-Discharging

Bagging the Clippings

Instructions for using the grass bag to collect clippings.

Installing the Grass Bag

Step-by-step guide to attach the grass bag to the mower frame.

Removing the Grass Bag

Procedure for removing the grass bag.

Side-Discharging the Clippings

Guidance on using side discharge for tall grass.

Installing the Side-Discharge Chute

Procedure for attaching the side-discharge chute.

Operating Tips and Cutting Grass Techniques

General Operating Tips

General advice for safe and effective mower operation.

Cutting Grass Techniques

Techniques for cutting grass at different heights and conditions.

Cutting Leaves Tips

Tips for mowing over leaves.

After Operation and Cleaning Procedures

After Operating Safety

Safety precautions to follow after completing mowing.

Hauling Safety Precautions

Safety tips for loading and unloading the machine.

Cleaning Under the Machine

Methods for cleaning grass and debris from the mower deck underside.

Scraping Under the Machine

Alternative method for cleaning the mower deck underside.

Cleaning the Mower Wheels

Procedure for cleaning the mower wheels and gear area.

Recommended Maintenance Schedule and Safety

Maintenance Schedule

Table outlining maintenance tasks based on service intervals.

Maintenance Safety Precautions

Crucial safety rules to follow before performing any maintenance.

Servicing the Air Filter

Instructions for cleaning and replacing the air filter.

Engine Oil and Air Filter Maintenance

Changing the Engine Oil

Procedure for draining and refilling engine oil.

Air Filter Cleaning and Replacement

Detailed steps for cleaning the foam and replacing the paper air filter.

Changing the Oil Filter and Engine Oil

Changing the Oil Filter

Step-by-step guide to remove and install a new oil filter.

Checking Engine Oil Level After Filter Change

Procedure to check and add oil after filter replacement.

Spark Plug and Belt Checks

Servicing the Spark Plug

Instructions for cleaning, gapping, and replacing the spark plug.

Checking Belt Condition

Procedure for inspecting belts for damage and wear.

Emptying Fuel Tank and Cleaning Filter

Steps for safely emptying the fuel tank and cleaning the filter.

Fuel Filter and Blade-Drive System Maintenance

Changing the Fuel Filter

Procedure for replacing the fuel filter.

Servicing the Blade-Drive System

Maintenance and adjustment of the blade-drive system, including belt tension.

Servicing and Inspecting Cutting Blades

Servicing the Cutting Blades

Instructions and warnings related to cutting blade maintenance.

Preparing for Blade Servicing

Safety precautions before working on the cutting blades.

Inspecting the Cutting Blades

Procedure for checking cutting edges for sharpness, wear, and damage.

Checking for Bent Blades

Method to check if the blades are bent or damaged.

Removing and Installing Cutting Blades

Removing the Blades

Steps to safely remove the mower blades.

Installing the Blades

Procedure for correctly installing mower blades.

Blade Installation and Blade-Drive Belt

Blade Installation Details

Important positioning and tightening instructions for blade installation.

Changing the Blade-Drive Belt

Procedure for replacing the blade-drive belt.

Changing Blade-Brake-Clutch Belt and Adjusting Cable

Changing the BBC Belt

Steps to replace the BBC belt.

Adjusting the Blade-Brake Cable

Procedure to adjust the blade-brake cable.

Adjusting Blade-Brake Cable and Transmission Belt

Adjusting Blade-Brake Cable Slack

Detailed steps for adjusting the blade-brake cable slack.

Changing the Transmission Belt

Procedure for replacing the transmission belt.

Transmission and Self-Propel Cable Adjustment

Adjusting the Transmission

Procedure to adjust the transmission if traction is lost.

Adjusting the Self-Propel Cable

Procedure to adjust the self-propel cable for proper operation.

Storage and Preparation for Storage

Storage General Information

Guidelines for storing the mower in a cool, clean, dry place.

Preparing the Fuel System for Storage

Safety warnings and procedures for preparing the fuel system for storage.

Preparing the Engine for Storage

Steps to prepare the engine for long-term storage.

Removing the Machine from Storage

Procedure for taking the mower out of storage and preparing it for use.

Troubleshooting Engine Problems

Engine Does Not Start Troubleshooting

Common causes and corrective actions for an engine that won't start.

Engine Starts Hard or Loses Power

Troubleshooting steps for poor engine performance.

Engine Runs Rough Troubleshooting

Solutions for an engine that runs unevenly.

Excessive Machine or Engine Vibration

Diagnosing and fixing excessive vibration issues.

Troubleshooting Mowing and Drive Issues

Uneven Cutting Pattern Troubleshooting

Causes and solutions for an uneven cut.

Discharge Chute Plugged Troubleshooting

Troubleshooting a clogged discharge chute.

Machine Does Not Self-Propel Troubleshooting

Fixes for issues with the self-propel system.

Blades Do Not Rotate or Slip Troubleshooting

Diagnosing and resolving problems with blade rotation.

Blades Contact Each Other Troubleshooting

Correcting issues where blades interfere with each other.

Toro Warranty Information and Service

Warranty Conditions and Products Covered

Details of warranty coverage for various Toro products.

Warranty Exclusions

Exclusions from the Toro warranty coverage.

Obtaining Warranty Service

Procedure to follow for warranty repairs and service.

Owner Responsibilities for Maintenance

Owner's duties regarding maintenance and care of the product.

Related product manuals

Toro TurfMaster 22200

32 pages

Toro TurfMaster 22210

36 pages

Toro TurfMaster HDX 22215

259 pages

Toro TurfMaster HDX

40 pages

Z Master Commercial TURBO FORCE 3000 Series

Toro TurfMaster 22205TE User Manual

Table of Contents

Questions and Answers:

Toro TurfMaster 22205TE Specifications

Summary

Introduction to Toro Walk-Behind Mower Operation

Safety-Alert Symbol

Product Identification and Serial Numbers

Key Terminology in Manual

General Safety Precautions for Mower Operation

General Safety Guidelines

Safety and Instructional Decals

Understanding Safety Decals and Symbols

Thrown Object Hazard Warning

Cutting and Dismemberment Hazard

Operator Training and Guards

Safe Mowing on Slopes

Identification of Hazard Symbols

Key Safety Decals and Controls Identification

Moving Parts and Guard Safety

Parking on Slopes Safety

Cutting Height Adjustment Controls

Throttle Lever Operation

Setting Up the Toro Walk-Behind Mower

Installing the Mower Handle

Adjusting Handle Height

Filling Engine Oil and Initial Checks

Filling the Engine with Oil

Checking Engine Oil Level

Engine Oil Specifications

Assembling the Grass Bag

Assembling the Grass Bag

Toro Mower Product Overview and Controls

Mower Component Identification

Control Bar and Throttle Operation

Toro Mower Specifications

Operating the Toro Mower: Before Operation

Before Operation Safety Checks

Fuel Safety Guidelines

Filling the Fuel Tank

Engine Oil and Cutting Height Checks

Checking Engine-Oil Level

Adjusting Cutting Height

Blade System Operation and Safety

Checking Blade-Stop System Operation

Blade-Stop Test Without Grass Bag

During Operation Safety Rules

Safe Operation Practices and Starting Engine

Slope Safety Precautions

Starting the Engine

Shutting Off the Engine

Operating Self-Propel Drive and Cutting Blades

Engaging Drive and Brakes

Disengaging the Parking Brake

Engaging and Disengaging the Parking Brake

Preparing for Clipping Recycling

Clipping Management: Bagging and Side-Discharging

Bagging the Clippings

Installing the Grass Bag

Removing the Grass Bag

Side-Discharging the Clippings

Installing the Side-Discharge Chute

Operating Tips and Cutting Grass Techniques

General Operating Tips

Cutting Grass Techniques

Cutting Leaves Tips

After Operation and Cleaning Procedures

After Operating Safety

Hauling Safety Precautions

Cleaning Under the Machine

Scraping Under the Machine

Cleaning the Mower Wheels

Recommended Maintenance Schedule and Safety

Maintenance Schedule

Maintenance Safety Precautions

Servicing the Air Filter

Engine Oil and Air Filter Maintenance

Changing the Engine Oil

Air Filter Cleaning and Replacement

Changing the Oil Filter and Engine Oil