Toro TurfMaster 22205TE - Adjusting Blade-Brake Cable and Transmission Belt; Adjusting Blade-Brake Cable Slack; Changing the Transmission Belt

SUPERCEDED
Note:Savetheboltsforinstallingthebeltcoverto
themachinehousing.
4.Removeanydebrisfromunderthebeltcover.
5.Loosenthecable-clampscrew(Figure47).
1
2
G019923
g019923
Figure47
1.Cable-clampscrew
2.Blade-brakecable
6.Pullthecablejackettoremoveslack(Figure48).
Note:Donotputtensiononthespring.
g195540
Figure48
1.Cableclamp2.Spring
7.Markthebrakecable(Figure49),thenadjustthejacket
untilthereisapproximately3mm(1/8inch)ofslack
(Figure50).
g195615
Figure49
1.Markthecablehere
g195616
Figure50
1.Slack—3mm(1/8inch)
8.Torquethecable-clampscrewto11to14N∙m(99to
121in-lb)tolocktheadjustmentinplace.
9.Installthebeltcoverwiththe4boltsthatyouremoved
instep3.
10.Connectthewiretothesparkplug.
11.Checktheoperationoftheblade-brakeclutch.
ChangingtheTransmission
Belt
ServiceInterval:Every250hours
1.Shutofftheengineandwaitforallmovingpartsto
stop.
2.Disconnectthewirefromthesparkplug.
3.Removethe4boltsthatholdthebeltcovertothe
machinehousing.
Note:Savetheboltsforinstallingthebeltcoverto
themachinehousing.
4.Removethebeltcover.
5.Removeanydebrisfromunderthebeltcover.
26