Specifications:
Receiver Mounting Options: Stainless steel screws and/or double-sided foam
tape.
Sensor module Mounting Options: Quick-Clip
TM
rain gutter bracket and roof
eaves/fascia mounting bracket with stainless steel screws.
Sensor module Range: Up to 300' line-of-site.
Sensor Type: Industry-standard hygroscopic disc stack with adjustable rainfall
sensitivity.
Transmitter Battery Type: (2) 3V cells - CR2032 (or equivalent).
Average Battery Life: Five years
Operating Temperature Range: -20°F to 120°F
Receiver Power Input: 22–28 VACc/VDC, 100mA (from existing controller/timer
with Class 2, UL-approved transformer).
Relay Contacts Output: Normally Open (NO) and Normally Closed (NC)
3A at 24 VAC.
Receiver Controls: Sensor Status Indicator, Signal Indicator, Smart Bypass
Switch, Power Indicator with low battery/poor communication warning.N
11
To Next Page
Loading...
