EasyManua.ls Logo

Toro Workman 07040 - Checking the Transaxle-Fluid Level; Changing the Transaxle Fluid; Checking the Neutral Gear-Shift Position

Toro Workman 07040
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Checkingthe
Transaxle-FluidLevel
ServiceInterval:Every100hours
FluidType:SAE80W-90(APIMT-1)orSAE80W-90
(APIGL-5)
1.Parkthemachineonalevelsurface.
2.Engagetheparkingbrake.
3.Shutofftheengineandremovethekey.
4.Removethellplugonthetransaxle(Figure57).
Note:Theuidlevelshouldbeevenwiththe
bottomofthellplug.
g035761
Figure57
1.Drainplug2.Fillplug
5.Iftheuidlevelislow,removethellplugand
addthespecieduiduntilitrunsoutofthehole
(Figure57).
6.Replacethellplugandtorqueitto20to27
N∙m(15to20ft-lb).
ChangingtheTransaxle
Fluid
ServiceInterval:Every800hours/Yearly(whichever
comesrst)
FluidType:SAE80W-90(APIMT-1)orSAE80W-90
(APIGL-5)
FluidCapacity:1.6L(1.7USqt)
1.Alignadrainpanunderthedrainplug(Figure
57).
2.Removethellplugandtheseal(Figure57).
Note:Retainthellplugandsealforinstallation
instep6.
3.Removethedrainplugandtheseal,andallow
theuidtodraincompletely(Figure57).
Note:Retainthedrainplugandsealfor
installationinstep4.
4.Installthedrainplugandseal,andtorqueitto
20to27N∙m(15to20ft-lb).
5.Fillthetransaxlewiththespecieduiduntilit
runsoutofthellhole.
6.Installthellplugandseal,andtorqueitto20to
27N∙m(15to20ft-lb).
CheckingtheNeutral
Gear-ShiftPosition
ServiceInterval:Every100hours
Whenperformingroutinemaintenanceand/orengine
diagnostics,thetransaxlemustbeshiftedinto
NEUTRAL.ThemachinehasaNEUTRALpositionon
thegear-shiftselector,whichcontrolstheneutralin
thetransaxle.Thefollowingstepsshouldbetaken
tomakesurethattheneutralshiftleveroperatesthe
transaxleneutralcorrectly:
1.Setthegear-shiftselectortotheNEUTRAL
position.
2.Rotatethesecondaryclutch(Figure64)toseeif
itspinsfreelyintheNEUTRALposition.
3.Setthegear-shiftselectortotheFORWARD
position.
4.Rotatethesecondaryclutch(Figure64)toseeif
itrotatestherearwheels.
5.Setthegear-shiftselectortotheREVERSE
position.
6.Rotatethesecondaryclutch(Figure64)toseeif
itrotatestherearwheels.
7.Ifanyofthesetestsfail,proceedtoAdjusting
theNeutralGear-ShiftPosition(page48).
47

Table of Contents

Related product manuals