Toro Workman HD 07369 User Manual (English)

Questions and Answers:

T
Travis BlackAug 2, 2025
How to fix Toro Workman HD 07369 engine that won't start?
- D
  douglasfitzpatrickAug 2, 2025
  If your Toro Utility Vehicle's engine isn't starting, starts with difficulty, or stops running, several factors could be the cause. Here's what you can check: * Ensure the hydraulic lever is not locked in the forward position. * Verify the fuel tank isn't empty and fill it if needed. * Make sure the fuel-shutoff valve is open. * Check the oil level in the crankcase and add oil if it's low. * Confirm the throttle control is midway between the slow and fast positions. * Inspect the air cleaner and replace or clean it, if it’s dirty. * Examine the spark plug; adjust or replace it if it's fouled or improperly gapped. * Check the spark-plug wire connection.
M
Melissa MooreAug 10, 2025
What to do if the hydraulics don't work on my Toro Utility Vehicle?
- K
  Kimberly HermanAug 10, 2025
  If the hydraulics on your Toro Utility Vehicle are not functioning correctly, consider the following: * If connecting or disconnecting quick couplers is difficult, relieve the pressure on the couplers. * Check for hydraulic leaks. If you find them, it may be that fittings are loose or the o-ring is missing.
B
Brad MillerAug 17, 2025
Why is the power steering not working on my Toro Workman HD 07369 Utility Vehicle?
- A
  Alexandra SmithAug 17, 2025
  If the power steering on your Toro Utility Vehicle isn't working correctly, there are a few things to inspect: * Check the hydraulic-oil level and add hydraulic fluid if it is low. * If the hydraulic oil is hot, allow it to cool. * Check and ensure that the pump is working.
J
Jamie WilliamsAug 25, 2025
How to stop a squealing noise in my Toro Workman HD 07369 Utility Vehicle?
- T
  Tiffany MirandaAug 26, 2025
  If you notice a squealing noise in your Toro Utility Vehicle, here are a couple of potential causes: * If the valve is left in the On detent position, disengage it. * Check the belt to ensure it has the correct tension.

Toro Workman HD 07369 Specifications

General

Brand	Toro
Model	Workman HD 07369
Category	Utility Vehicle
Language	English

Summary

Safety

Supervisor's Responsibilities

Ensures operators are trained and familiar with the manual and vehicle labels.

Pre-Operation Checks

Read and understand the manual before operating the machine.

Maintenance

Operator Sound Pressure Level

Details the A-weighted sound pressure level at the operator's ear.

Operator Vibration Levels

Hand-Arm Vibration Exposure

Specifies vibration limits for hand-arm contact.

Whole Body Vibration Exposure

Specifies vibration limits for the entire body.

Safety Decals and Instructions

Identification of Safety Decals

Explains various safety and instructional decals on the machine.

Vehicle Setup Procedures

Checking Fluid Levels Before Operation

Procedures for checking engine oil, transaxle/hydraulic, and brake fluid.

Vehicle Product Overview

Controls Description

Details pedals, shifter, differential lock, and primary controls.

Key Operator Controls

Parking Brake & Hydraulic Lift Operation

Explains parking brake operation and hydraulic lift functions.

Range Shifter & Ignition Switch Functions

Details range shifter and ignition switch functions.

Additional Controls and Indicators

Switches, Warning Lights, and Gauges

Covers lockout switch, lights, warning lights, and fuel gauge.

Specifications

Dimensions

Provides physical dimensions of the vehicle.

Attachments and Accessories

Lists available attachments and accessories for the vehicle.

Operation

Checking the Engine Oil Level

Procedure for checking and adding engine oil.

Adding Fuel

Guidance on using fresh, clean, unleaded gasoline.

Checking Transaxle/Hydraulic Fluid

Procedure for checking transaxle/hydraulic fluid level.

Wheel Nut Torque and Tire Pressure

Specifies torque for wheel nuts and checks tire pressure.

Checking Brake Fluid and Pump Belt

Procedures for checking brake fluid and pump belt tension.

Pre-starting Checks

Essential checks to perform before operating the vehicle.

Starting and Driving the Vehicle

Instructions for starting the engine and driving the vehicle.

Stopping and Break-in Procedures

Guidance on stopping the vehicle and new vehicle break-in.

Interlock System Checks

Procedures for verifying safety interlock switches.

Operating Characteristics

Vehicle Design and Safety

Discusses vehicle design, its off-road nature, and operator safety.

Passengers and Speed

Guidelines for carrying passengers and safe operating speeds.

Turning, Braking, and Hills

Covers safe practices for turning, braking, and operating on hills.

Tip Overs

ROPS and Safety Measures

Discusses ROPS, operator familiarity, and actions to prevent tip-overs.

Loading and Dumping

Guidelines for safe loading, weight distribution, and dumping.

Using The Differential Lock

Traction Enhancement

Explains how differential lock enhances traction.

Operation and Limitations

Covers safe use and limitations of the differential lock.

Transporting Vehicle

Trailer and Tie-Down Points

Instructions for transporting the vehicle on a trailer.

Towing the Vehicle

Emergency Towing Procedure

Procedure for towing the vehicle in an emergency.

Towing a Trailer with the Vehicle

Hitch Requirements and Loading

Details hitch requirements and trailer loading guidelines.

Hydraulic Control

Control Lever Positions

Describes Off, Raise, Lower, and On positions of the hydraulic control lever.

Connecting and Disconnecting Couplers

Procedures for connecting and disconnecting hydraulic quick couplers.

Troubleshooting the Hydraulic Control

Common Hydraulic Issues

Lists common problems and their potential causes.

Recommended Maintenance Schedule(s)

Service Interval Chart Overview

Presents a schedule for maintenance tasks based on service intervals.

Service Interval Chart

Fluid Specifications and Intervals

Details fluid types, capacities, and change intervals.

Heavy Duty Operation

Maintenance Frequency Adjustment

Conditions requiring more frequent maintenance.

Premaintenance Procedures

Using the Bed Safety Support

Instructions for safely using the bed safety support.

Removing the Full Bed

Steps for safely removing the full bed from the vehicle.

Installing the Full Bed

Steps for safely installing the full bed onto the vehicle.

Jacking the Vehicle

Vehicle Jacking Points and Safety

Details safe jacking points and essential safety precautions.

Removing the Hood

Hood Removal Steps

Procedure for safely removing the vehicle hood.

Lubrication

Greasing Bearings and Bushings

Details lubrication points and procedures for bearings and bushings.

Engine Maintenance

Servicing the Air Cleaner

Instructions for cleaning and oiling the air cleaner components.

Changing Engine Oil and Filter

Procedure for changing the engine oil and oil filter.

Replacing Spark Plugs

Instructions for replacing spark plugs.

Fuel System Maintenance

Replacing the Fuel Filter

Procedure for replacing the fuel filter.

Fuel Lines and Connections

Inspection of fuel lines and connections.

Electrical System Maintenance

Fuses

Location and identification of fuses for the electrical system.

Jump Starting the Vehicle

Safety warnings and steps for jump starting the vehicle.

Servicing the Battery

Drive System Maintenance

Adjusting Shift Cables

Procedure for adjusting the transmission shift cables.

Adjusting High-Low Cable

Procedure for adjusting the high-low range shifter cable.

Adjusting Differential Lock Cable

Procedure for adjusting the differential lock cable.

Inspecting the Tires

Guidance on inspecting tire condition and pressure.

Checking Front Wheel Alignment

Cooling System Maintenance

Removing Debris from Cooling System

Instructions for cleaning cooling fins and shrouds.

Brake Maintenance

Adjusting the Parking Brake

Procedure for adjusting the parking brake lever.

Adjusting the Brake Pedal

Procedure for adjusting the brake pedal.

Belt Maintenance

Adjusting the Pump Drive Belt

Procedure for checking and adjusting the pump drive belt tension.

Controls System Maintenance

Adjusting the Accelerator

Procedure for adjusting accelerator low idle and high idle stops.

Adjusting the Clutch Pedal

Procedure for adjusting the clutch pedal free play.

Adjusting the Choke

Procedure for adjusting the choke cable.

Hydraulic System Maintenance

Changing Hydraulic Fluid and Strainer

Procedure for changing fluid and cleaning the hydraulic strainer.

Replacing Hydraulic Filter

Procedure for replacing the hydraulic filter.

Raising the Box in an Emergency

Raising Box via Starter

Method to raise box using starter motor.

Raising Box via Hydraulic System

Procedure to raise box by jumping the hydraulic system.

Storage

Pre-storage Preparation

Steps for preparing the machine for long-term storage.

Schematics

Hydraulic Schematic

Diagram of the vehicle's hydraulic system.

Electrical Schematic

Diagram of the vehicle's electrical system.

Related product manuals

Toro Workman HD Series

328 pages

Toro Workman HDX

318 pages

Toro Workman HDX Auto

280 pages

Toro Workman HDX 07384

68 pages

Toro Workman HDX Series