Toro Workman 07040 - Adjusting the Neutral Gear-Shift Position; Maintaining the Primary-Drive Clutch

AdjustingtheNeutral
Gear-ShiftPosition
1.Loosenthejamnutsonthegear-shiftcableand
adjustthemasnecessary(Figure58).
g034455
Figure58
1.Shiftlever3.Gear-shiftcable
2.Spannerbar
4.Jamnuts
2.Testthegear-shiftpositionbyrotatingthe
gear-shiftselectortothe3differentpositions
andchecktoseeiftheshiftlever(Figure58)
shiftsproperlywhenshiftingthegears;referto
Gear-ShiftLeverandGear-ShiftIndicator(page
13).
3.Verifythatallofthepositionsareworking
correctlybyrepeatingthestepsinCheckingthe
NeutralGear-ShiftPosition(page47).
Maintainingthe
Primary-DriveClutch
ServiceInterval:Every400hours/Yearly(whichever
comesrst)
CAUTION
Thedustintheclutchbecomesairborneand
coulddamageyoureyes,oryoucouldinhale
it,causingbreathingdifculties.
Weareyeandrespiratoryprotectionwhen
performingthisprocedure.
1.Raiseandlatchthecargobed;refertoRaising
theCargoBedtotheDumpPosition(page20).
2.Removethe3boltssecuringthecovertothe
clutch,andremovethecover(Figure59).
Note:Retainthecoverandboltsforinstallation.
g011947
Figure59
1.Cover
2.Bolts
3.Thoroughlycleantheinsideofthecoverand
theinnercomponentsoftheclutchusing
compressedair.
4.Installtheclutchcoverandsecureitwiththe3
bolts(Figure59)thatyouremovedin2.
5.Lowerthecargobed.
48