Workman 1100/1110/2100/2110 Page 6 – 5 Electrical System
General Run Problems
Problem Possible Causes
Battery does not charge. Wiring to the charging circuit (see Wiring Schematics)
components is loose, corroded, or damaged.
Voltage regulator and/or starter/generator is faulty.
Battery is dead.
Engine kills during operation. Wiring to the run circuit (see Wiring Schematics)
components became broken or disconnected.
RPM shutdown module is faulty (Workman 2100 and
2110).
Engine or fuel system is malfunctioning (see Engine
Chapter).
Electrical
System
To Next Page
Loading...
