Toro Workman HDX 07384 - Hydraulic System Maintenance; Hydraulic System Safety; Checking the Transaxle;Hydraulic-Fluid Level

Convertingthe
Speedometer
Youcanconvertthespeedometerfrommphtokm/h
orkm/htomph.
1.Parkthemachineonalevelsurface,engagethe
parkingbrake,shutofftheengine,andremove
thekey.
2.Removethehood;refertoRemovingtheHood
(page35).
3.Locatethe2loosewiresnexttothe
speedometer.
4.Removetheconnectorplugfromtheharness
wireandconnectthewirestogether.
Note:Thespeedometerswitchestokm/hor
mph.
5.Installthehood.
HydraulicSystem
Maintenance
HydraulicSystemSafety
•Seekimmediatemedicalattentionifuidisinjected
intoskin.Injecteduidmustbesurgicallyremoved
withinafewhoursbyadoctor.
•Beforedisconnectingorperforminganyworkon
thehydraulicsystem,relieveallpressureinthe
systembyshuttingofftheengine,cyclingthe
dumpvalvefromraisetolower,and/orlowering
thecargobedandattachments.Placetheremote
hydraulicsleverintheoatposition.Donotwork
underaraisedbedwithouttheproperbedsafety
supportinplace.
•Ensurethatallhydraulic-uidhosesandlinesare
ingoodconditionandthatallhydraulicconnections
andttingsaretightbeforeapplyingpressureto
thehydraulicsystem.
•Keepyourhandsandbodyawayfrompinhole
leaksornozzlesthatejecthigh-pressurehydraulic
uid.
•Usecardboardorpapertondhydraulicleaks.
Servicingthe
Transaxle/Hydraulic
System
Transaxle/HydraulicFluid
Specications
Transaxle-uidtype:DexronIIIATF
Checkingthe
Transaxle/Hydraulic-FluidLevel
ServiceInterval:Beforeeachuseordaily—Check
thetransaxle/hydraulic-uidlevel.
(Checktheuidlevelbeforethe
engineisrststartedandevery8
hoursordaily,thereafter.)
1.Parkthemachineonalevelsurface.
2.Engagetheparkingbrake.
3.Shutofftheengineandremovethekey.
4.Cleantheareaaroundthedipstick(Figure70).
55