Toro Workman HDX - Page 17

g245853
Figure 40
1. W ater gutter 2. Hex-washer head bolt
3. Using a tin snipper , remove the shipping tang
from each side of the water gutter ( Figure 41 ).
g246161
Figure 41
1. Shipping tang
4. Connect the 122 cm (48 inches) clear tube to
the 33 cm (13 inches) clear tube and 43 cm (17
inches) clear tube using the tee tting ( Figure
42 ).
g245855
Figure 42
1. Passenger ’ s side clear
tube—122 cm (48 inches)
4. Driver ’ s side clear
tube—43 cm (17 inches)
2. T ee tting
5. W ater gutter
3. Floor clear tube—33 cm
(13 inches)
5. Starting from the passenger ’ s side, route the
connected clear tube down through the oor
board (with the clutch pedal) to the driver ’ s side
of the machine ( Figure 43 ).
6. Secure the connected clear tube with the 3
magnetic tie-wrap mounts and 3 cable ties
( Figure 43 ).
g245856
Figure 43
1. Routed connected tubes
2. Cable ties and magnetic
tie-wrap mounts
17