Workman MDX Page 3 -- 13 Briggs & Stratton Gasoline Engine
Removal (Fig. 11)
1. Park machine on a level surface, stop the engine, en-
gage parking brake and remove the key from the ignition
switch.
2. Raise cargo box and support with prop rod.
3. To prevent contamination of engine lubrication sys-
tem during adapter removal, thoroughly clean exterior of
filter adapter, hoses and fittings.
4. Remove oil filter adapter components as needed us-
ing Figure 11 as a guide.
Installation (Fig. 11)
1. Install removed oil filter adapter components using
Figure 11 as a guide. Torque fittings (items 2, 4 and 6)
from 40 to 50 in--lb (4.6 to 5.6 N--m).
2. Check and adjust engine oil level.
3. Lower and secure cargo box.
Briggs & Stratton
Gasoline Engine
To Next Page
Loading...
Need help?
General
