Toro Z Master 4000 Series - Choke Cable Assembly Replacement

ThrottleCableAssemblyUnitInstallation(continued)
g346220
Figure31
5.Connectthebatterybyinstallingthepositivecablerst,thenthenegative
cabletothebattery.
ChokeCableAssemblyReplacement
ChokeCableAssemblyUnitRemoval
1.ParkthemachineonalevelsurfaceanddisengagethePTO.Stopthe
engine,waitforallmovingpartstostopandremovethekey.Engagethe
parkingbrake.
2.Disconnectthebatterybyremovingthenegativecablerst,thenthepositive
cablefromthebattery.
3.Removethe4(1/4-20inch)torxscrewssecuringtheRHsidepodtotheRH
console.RemovetheRHsidepodfromtheRHconsole.
g346220
Figure32
4.Removethenutfromthebottomsideofthechokecablesecuringthecable
tothepod.
5.Disconnectthechokecable.
Chassis:ServiceandRepairs
Page5–16
4000SeriesZMASTER®ServiceManual
3442-427RevA