Adjusting the Rear-Shock
Assemblies
Machines with MyRide™
Suspension System Only
The MyRide™ suspension system adjusts to provide
a smooth and comfortable ride. Y ou can adjust the
rear 2-shock assemblies to quickly and easily change
the suspension system. Position the suspension
system where you are most comfortable.
The slots for the rear-shock assemblies have
detent positions for reference. Y ou can position the
rear-shock assemblies anywhere in the slot, not just in
the detent positions. The following graphic shows the
position for a soft or rm ride and the dif ferent detent
positions ( Figure 14 ).
g030065
Figure 14
1. Firmest position 3. Detents in the slots
2. Softest position
Note: Ensure that the left and right rear-shock
assemblies are always adjusted to the same positions.
Adjust the rear-shock assemblies ( Figure 15 ).
g030024
g030019
Figure 15
20
To Next Page
Loading...
